So, yesterday I re-made the leaf ring that I had made previously but melted. I also made another leaf ring of a different style, a small pounded ring for Kayla, and two pendants. The small leaf ring you see above didn't take all that long because I knew exactly what I was doing with it. Surprisingly the solder seam was perfectly aligned so I didn't melt the ring again. The other leaf ring I made is for Daniela's mom for Mother's Day. It is pretty simple as you can see, just a leaf that wraps around your finger. With both of these rings I got to learn two new skills. 1) I learned how to use a bur to engrave the surface of the silver, 2) I got to learn how to oxidize silver so that the engraved parts look black and stand out more.


The small pounded ring looks like the bigger one I had already made, except that it is a pinky ring. There really isn't much to this ring since all I had to do was mill out some wire, flatten it, solder it, and then pound it with a rounded hammer. So it was simple really.

The two pendants I really like. The one with the flat pearl I had started making on Tuesday. As I already told you I wanted to make a twisted rope ring but instead ended up making a pendant because the piece was too small. Anyway I soldered the ends together, which was very hard since I had six pieces of wire to solder together, and connected the penny pearl to it on the inside.


The other pendant is a three part piece. The symbols are peace, love, and peace/love/harmony. Confusing I know, but the bird stands for all three of those I guess. So I simply melted some silver, milled it flat, drew my designs on the surface, then saw them out. Then I connected them to this chain and there you have a cute little necklace.

Yesterday I spent a large portion of the day drawing out wire for some braided rings. It took me about an hour to finish drawing out the wire today. So, with about six feet of wire I made four braided rings. However, after looking at them together on the finger, I decided I did not like them and made two of them into earrings instead. With the remaining wire that I had after making the rings I made a double wire braided strand and made two rings out of it. These I really like because they look sort of celtic and not so much like a braid. I like the braided earrings, but they are very very flimsy, which is kind of a drag. All in all, though, I am proud of these creations.



After making these I set out to make a rope ring. This would consist of about six wires being twisted together and then soldered. I twisted the remaining wire I had, but it wasn't long enough. So, I decided to make a pendant out of it with a penny pearl center. Since the piece was sort of an afterthought I didn't put too much effort into making it pretty, but it looks okay.

After all of these twisted and braided wire pieces I started on a ring for a friend. It had leaves stacked on top of each other, sort of like grain. I hand sawed the whole thing out, then used a bur to etch leaf patterns on the surface. After about two hours of this I had the ring all ready to go to solder. However, when I was soldering it...the entire piece melted into a pile of useless junk. It happened because the solder leeched onto the surface of the silver and instantly heated it to its melting point. Since silver is so conductive the heat spread rapidly and the whole thing was ruined before I knew it. Now I have to re-start the ring entirely!

This first picture is of an African Turquoise pendant. This was fairly simple to make. All it took was some grinding down of the stone, some fitting, some soldering, some filing, some polishing, and there you have a pendant. I didn't run into any problems, which seems to be happening more since I have more experience. This is the first pendant I have made though because they are sort of boring to make.



Then we have this ring. This took me all day! I twisted the swirls out of silver wire then had to shape them perfectly to the ring. Since I was to solder them onto the ring they had to be completely flush, which wasn't easy since the surface is rounded. So, eventually I got them on there and finished the ring. But, I am not so sure I like how it is now. I might alter it tomorrow if I feel like it.

On Thursday I started a celtic swirly ring. I milled out a piece of silver that I had melted down and drew my design out on it with sharpie. I then spent the rest of the day sawing out the design by hand. On Friday I soldered it together and polished it. I like this ring because it is very art nouveau. However, it is also very fragile, due to the thin parts that were sawed out.



The other ring I made took me only part of one day. I made five simple bands and soldered them together. I then made a bezel for a penny pearl that I had already ground down. I soldered the bezel to a back plate, then sawed it out, and soldered it onto the five rings. I put the pearl in and pushed the bezel edge over.

The only problem that I encountered with this ring was that the solder seam on the bezel was not good enough, so when I tried to solder the ends together the solder did not flow down the crack, and instead leeched onto the surface of the silver and melted the ends enough so that the bezel was too small. So I had to remake the bezel, but it wasn't hard since I have had so much practice at it.

Now, I have two more days at Barry's then I move onto the photography portion of my project. However, I have completely run out of things to make since I have made everything I originally designed in my sketch book. Now I am scrambling to come up with some designs that I can get done in two days!

Ok, not to sound overly arrogant, but I am sooo happy with how my things turned out. I cranked out two pairs of earrings and two rings in two days. So, while making my first pair of earrings that you see below, I encountered a lot of trouble. The bezels that go around the stones do not have backs. This means that you have to close one side of the bezel and then set the stone in it and then close the other side. Well...to say the least I had a hard time doing this. The bezel has to be an exact fit around the stone, otherwise it wiggles around inside the bezel. My bezels were not a perfect fit. So, I had to hammer, file, and tap for hours to get my bezels to fit. If you can see the roughness of the bezels on the stones you are looking at the small remainder of what I could not hide. It is alright though because it goes with the earrings. Anyway, after hours of tedious, and very very frustrating work I had one bezel finished and I was soldering the jump ring onto the second when it melted!!! I mean the thing just collapsed into a small vibrating glob of red hot silver. The bezels were so thin that the torch heated them up very quickly. So, I had to start my perfect bezel over. Eventually it got done and I finished the earrings. It was cool though because I have never made hoops before. So I totally improvised my hoops and they turned out great!

The next piece is the pair of pearl earrings. I like these because they aren't conventional in the fact that the bezels aren't closed. This way the white of the pearl reflects on the silver and casts a certain glow in the right lighting. In this picture you see the shadow that the open bezel creates. There is no risk of the stones falling out because they are set snug in their bezels. These were pretty simple to make, thankfully. I did melt anything or make my bezel too small so it was a smooth ride with these. It was fun though because I have never made studs before!

I am proud of all three of my pieces, but this ring I am most proud of. I had to made the bands for each ring, then made bezels for the stones. This process was different because they are faceted into a taper at the end.

With gems like these you have to set the stone on a filed edge so the point of the gem does not rest on the bottom of the bezel.

This means that you have to use an electric powered bur to file out a seat for the gem on an already thin bezel. Luckily I didn't encounter any problems with this part besides a lack of patience. I then set the bezels on the rings and soldered them. I then set the stones in their bezels and pushed the edges over. This takes longer than you think because, despite the smallness and thinness of the bezels, the silver is very hard to manipulate when the bezel is so small. So I eventually got that done and I did the usual buffer job. They look a little rough in this picture, I don't know why because they are actually very smooth. All in all though I am very very proud of this piece!

Lastly, these earrings I had made previously out of PMC. They were originally flat and had a very cloudy finish. So, I dapped them (meaning I rounded the flatness out) and I polished them. By simply doing these two things there is a world of a difference.

Although I am proud of my other rings, this is my favorite that I have made so far. It is simple and it has a very good weight to it. I discovered that I can melt down the PMC that I have and use it just like normal silver. So, I melted down some old rings that I had made years ago, that I didn't really like anyway, and I poured them into an ingot. I then milled down the blob of silver, aniling it every four times it went through the mill. I had to put the piece through the mill about thirty times, so you do the math. When you anil it ensures that the silver won't crack when you mill it down.

Silver gets very hard and stubborn when you work with it too much. So, when this happens and you do not anil the silver it will crack and then you have to start over. So, when you anil you have to heat the piece until it is glowing red and then keep it red for about a minute, without melting the silver. Anyway, after milling it down to the correct size and thickness I cut it and soldered it together. I then tapped it using a small, rounded, metal hammer to get the pock marks.

Today I worked on a new ring. It is going to be a three part ring. Each band will have it's own bezeled gem on it. I made the bezels and the bands today. All I have left to do is solder the bezels to the rings and set the gems in the bezels. I am also making a pair of pearl earrings. They are not conventional ones that are glued to a holder. They are cabochon pearls, meaning they look like a sphere cut in half. They are going to be set into bezels and then attached to posts. The bezels with their back plates have already been soldered together, so all I have left to do with those is to attach the posts and set the pearls in the bezels. OH and I also made bezels for a pair of tear drop green gems. These will have bezels around them but no back plate. I am going to hang them off of hoops, hopefully it works out how I imagine.

So... I got a ton done today because in addition to those I made a bracelet for my Aunt Biff. She asked me to make it for her this summer when I was at RISD, but I didn't have time. So, I made her the bracelet she wanted, but she has to wait to get it because I am going to use it in my photo shoot. This is the unfinished product. It needs some more filing and polishing.

Here is a diagram of everything I have been talking about with my stone rings: